Garmin LiveScope Plus LVS34 transducer
Sonar transducer from Garmin. Use the checker to see what it shares with other devices on your boat, from the maker's published list.
PGNs (Parameter Group Numbers) are the numbered NMEA 2000 messages devices use to share data. Two devices share a kind of data when one maker's list says it sends a PGN and the other maker's list says it receives the same PGN.
Check it with the rest of my boat →
Check with the manufacturer before buying. These results only compare the lists of data messages (PGNs) that makers publish. Firmware, settings and wiring can change what actually works.
Check it with other devices
Use the checker to see what it shares with other devices on your boat, from the makers' published lists. Check with the manufacturer before buying.
Source
- Garmin LiveScope Plus LVS34: LiveScope Plus LVS34 Transducer Installation Instructions, Garmin web install instructions, checked 2026-11-21. Where: Install instructions for the LVS34 with the LiveScope GLS 10 sonar module. The transducer cable goes to the GLS 10; the module then joins the Garmin Marine Network. This is not an 8-pin or 12-pin graph transducer port.. Source type: manufacturer. Last checked 2026-11-21. Confidence: high; list n2k_not_used.
Message names partly from CANboat. Spotted an error or a newer manual? Tell us. More: NMEA 2000 install guide · Find a fitter · All devices