Boat Compatibility

SeaTalk NG to NMEA 2000: which adaptor do you need?

Raymarine SeaTalk NG and NMEA 2000 can be joined with adaptor cables. Raymarine says its SeaTalk NG to DeviceNet adaptor cables connect NMEA 2000 devices to a SeaTalk NG backbone, or SeaTalk NG devices to an NMEA 2000 network. Raymarine cable list

Raymarine's own pages label the standard NMEA 2000 connector “NMEA2000 (DeviceNet)”. Raymarine adaptors Part numbers below are from Raymarine's own list, checked 2026-11-20.

Check with the manufacturer before buying. These results only compare the lists of data messages (PGNs) that makers publish. Firmware, settings and wiring can change what actually works.

Pick by job

Join a SeaTalk NG backbone to an NMEA 2000 backbone

Match the DeviceNet end to the free end of your NMEA 2000 backbone. The combined backbone still needs exactly two terminators, one at each end (see the install guide).

Plug one NMEA 2000 device into a SeaTalk NG backbone (or the other way round)

Short adaptor at the back of a device

Older SeaTalk 1 instruments or autopilots

Power

Where to get them

Raymarine SeaTalk NG to NMEA 2000 adaptor cablesJoins SeaTalk NG to standard NMEA 2000 (DeviceNet) cabling.Joins SeaTalk NG to standard NMEA 2000 (DeviceNet) cabling, e.g. A06082, A06083 or A06084 (spur) or A80674/A80675 (backbone).
Raymarine SeaTalk NG Starter Kit (T70134)Starter backbone parts with SeaTalk NG connectors.5-way connector (short backbone), 2 backbone terminators, 3 m spur cable and power cable (Raymarine's list). SeaTalk NG connectors.

Check with the manufacturer before buying. Buttons open the maker's own product page unless marked as an affiliate link.

Will the data work once it's plugged in?

The cable only joins the wiring. Whether a Raymarine display shows another brand's data depends on both devices' published message (PGN) lists. Check your exact models:

Garmin + Raymarine · Raymarine + Simrad · Lowrance + Raymarine · B&G + Raymarine · Raymarine + Victron · Yacht Devices + Raymarine · Maretron + Raymarine

Raymarine devices with a published PGN list in our data: Raymarine Axiom (LightHouse 4) · Raymarine i70s · Raymarine i70 · Raymarine EV-1 · Raymarine AIS700 · Raymarine Ray53/Ray63 · Raymarine Ray73 · Raymarine Evolution ACU

Check my boat →

Sources

Frequently asked

Can I connect Raymarine SeaTalk NG to NMEA 2000?

Yes, with adaptor cables. Raymarine says its SeaTalk NG to DeviceNet adaptor cables connect NMEA 2000 devices to a SeaTalk NG backbone, or SeaTalk NG devices to an NMEA 2000 network. Which data then flows depends on each device's published message (PGN) list.

Which cable joins a SeaTalk NG backbone to an NMEA 2000 backbone?

Raymarine lists 0.4 m SeaTalk NG to DeviceNet backbone cables: A80674 (DeviceNet male end) and A80675 (DeviceNet female end). Pick the one that matches the free end of your NMEA 2000 backbone.

Can I plug the A06082, A06083 or A06084 adaptor straight into the backbone?

No. Raymarine says not to connect these adaptors directly to a backbone; use them only as part of a spur (drop) connection between the backbone and a device.

Is old SeaTalk (SeaTalk 1) the same as SeaTalk NG?

No. Raymarine connects SeaTalk 1 devices to SeaTalk NG through a SeaTalk 1 to SeaTalk NG converter (kit E22158), not a plain adaptor cable.