Boat Compatibility

RaymarineVictron

Do Raymarine and Victron work together?

Yes, mostly one way. We compared 6 Raymarine–Victron model pairs using only the data lists (PGNs) the makers publish. 2 have data flowing both ways, 4 one way only. Raymarine to Victron: mainly position & time. Victron to Raymarine: mainly batteries & DC power, tank levels and AC power & generator. Less certain for Victron Cerbo GX, Victron Skylla-i and Victron VE.Bus inverter/charger, because of caveats in their published list (partial list, no send/receive direction, or an older, range-wide or dealer-hosted document). Maker-specific (proprietary) messages, used for things like cross-brand autopilot control or sonar sharing, are not counted between different brands.

Boat electronics share data over NMEA 2000 using numbered messages called PGNs (Parameter Group Numbers). Data only “flows” here when one maker's manual says its device sends a message and the other maker's manual says its device receives the same message.

Open these devices in the checker →

These are compatible:

No model pair on this page is confirmed by two full published lists.

“Compatible” here means they connect over NMEA 2000 and share data according to the makers' published lists. Maker-specific messages (e.g. cross-brand autopilot control) are not counted.

Needs checking:

Check with the manufacturer before buying. These results only compare the lists of data messages (PGNs) that makers publish. Firmware, settings and wiring can change what actually works.

Model by model

Data types each way, from the makers' published lists. Tap a pair to open it in the checker.

Raymarine Axiom (LightHouse 4) + Victron Cerbo GX Shares data both ways

Chartplotter / MFD + Gateway / converter · Check this pair

Data typeRaymarine Axiom (LightHouse 4) → Victron Cerbo GXVictron Cerbo GX → Raymarine Axiom (LightHouse 4)
Position & timeFlows 3 messages: Position, Rapid Update (129025); COG & SOG, Rapid Update (129026); GNSS Position Data (129029)—
Batteries & DC power—Flows 4 messages: DC Detailed Status (127506); Charger Status (127507); Battery Status (127508); +1 more
Tank levels—Flows 1 message: Fluid Level (127505)

Check before buying. Victron Cerbo GX: Only part of its data-message (PGN) list is published. Medium confidence: older or range-wide document. Its list Tell us if it worked

Raymarine i70 + Victron Cerbo GX Shares data both ways

Instrument display + Gateway / converter · Check this pair

Data typeRaymarine i70 → Victron Cerbo GXVictron Cerbo GX → Raymarine i70
Position & timeFlows 3 messages: Position, Rapid Update (129025); COG & SOG, Rapid Update (129026); GNSS Position Data (129029)—
Batteries & DC power—Flows 2 messages: DC Detailed Status (127506); Battery Status (127508)
Tank levels—Flows 1 message: Fluid Level (127505)

Check before buying. Victron Cerbo GX: Only part of its data-message (PGN) list is published. Medium confidence: older or range-wide document. Its list Tell us if it worked

Raymarine Axiom (LightHouse 4) + Victron Skylla-i One way only

Chartplotter / MFD + Battery charger · Check this pair

Data typeRaymarine Axiom (LightHouse 4) → Victron Skylla-iVictron Skylla-i → Raymarine Axiom (LightHouse 4)
Batteries & DC power—Flows 3 messages: Charger Status (127507); Battery Status (127508); Converter Status (127750)
AC power & generator—Flows 2 messages: AC Input Status (127503); AC Power / Current - Phase A (127744)
Switching, lighting & trim—Different message : both handle this data but list different PGNs

Check before buying. Victron Skylla-i: Only part of its data-message (PGN) list is published. No receive list is published, so we can't tell what data it accepts. Medium confidence: older or range-wide document. Its list Tell us if it worked

Raymarine i70 + Victron VE.Bus inverter/charger One way only

Instrument display + Inverter / charger · Check this pair

Data typeRaymarine i70 → Victron VE.Bus inverter/chargerVictron VE.Bus inverter/charger → Raymarine i70
Batteries & DC power—Flows 2 messages: DC Detailed Status (127506); Battery Status (127508)
Switching, lighting & trim—Different message : both handle this data but list different PGNs

Check before buying. Victron VE.Bus inverter/charger: Only part of its data-message (PGN) list is published. No receive list is published, so we can't tell what data it accepts. Medium confidence: older or range-wide document. Its list Tell us if it worked

Raymarine i70s + Victron VE.Bus inverter/charger One way only

Instrument display + Inverter / charger · Check this pair

Data typeRaymarine i70s → Victron VE.Bus inverter/chargerVictron VE.Bus inverter/charger → Raymarine i70s
Batteries & DC power—Flows 2 messages: DC Detailed Status (127506); Battery Status (127508)
Switching, lighting & trim—Different message : both handle this data but list different PGNs

Check before buying. Victron VE.Bus inverter/charger: Only part of its data-message (PGN) list is published. No receive list is published, so we can't tell what data it accepts. Medium confidence: older or range-wide document. Its list Tell us if it worked

Raymarine i70s + Victron Skylla-i One way only

Instrument display + Battery charger · Check this pair

Data typeRaymarine i70s → Victron Skylla-iVictron Skylla-i → Raymarine i70s
Batteries & DC power—Flows 1 message: Battery Status (127508)
Switching, lighting & trim—Different message : both handle this data but list different PGNs

Check before buying. Victron Skylla-i: Only part of its data-message (PGN) list is published. No receive list is published, so we can't tell what data it accepts. Medium confidence: older or range-wide document. Its list Tell us if it worked

How to check before buying

  1. Open the installation manual and find its NMEA 2000 PGN list: is the data listed as sent (transmit) on one device and received on the other?
  2. Read the latest firmware or software release notes; makers often add data in updates.
  3. Ask your dealer or the maker's support to confirm it with your exact models.

“Tell us if it worked” opens your email app. Reports tell us what to look into; we only mark something compatible when a maker's own document says so.

Gaps and fixes

Data that both devices in a pair handle, but that one can use and the other doesn't send (or sends as a different message number). Fixes only name devices whose published list sends that data.

Check with the manufacturer before buying. Buttons open the maker's own product page unless marked as an affiliate link.

Also in the checker: Raymarine EV-1, Raymarine AIS700, Raymarine Ray53/Ray63, Raymarine Ray73, Raymarine Evolution ACU, Victron BlueSolar MPPT 150/70, Victron BMV-700, Victron Lynx Shunt VE.Can, Victron Lynx Ion BMS.

Installing these together

Both connect to one NMEA 2000 backbone. Full basics, with sources, are in the NMEA 2000 install guide.

What you need

Set-up on the display

How long? Estimate

No maker publishes a DIY time. Our rough estimate: 1.5–3 hours to add one device to an existing, healthy backbone, or 4–7 hours to build a new small backbone for 2–4 devices.

How we got it: plan the backbone and measure (Garmin says to start with a diagram), run one drop cable, fit Ts, terminators and the power tap, update software, then select sources and test, plus SeaTalk NG adaptor and VE.Can cable and GX settings. It doesn't include mounting displays or transducers, cutting holes or long cable runs through the boat. If in doubt, use a qualified (NMEA-certified) installer. (Garmin N2K reference)

Common problems

Only from makers' manuals, support articles and installation guides.

More checks (power feeds, devices not showing up): install guide. Check with the manufacturer or a qualified installer before buying or drilling.

What you'll need to connect this

Example: a Raymarine Axiom (LightHouse 4) and a Victron Cerbo GX on a new backbone.

For 2 devices on one NMEA 2000 backbone. From the makers' install guides; see the install guide for sources. Quantities are estimates

One kit covers the basics

Garmin NMEA 2000 Starter Kit (010-11442-00)Backbone, 2 T-connectors, terminators, power and a drop cable. Standard Micro connectors work with any NMEA 2000 brand.Drop cable (2 m), backbone cable (6 m), power cable (2 m), 2 T-connectors, male and female terminators (Garmin's list). Standard NMEA 2000 Micro connectors.

Brand adapters for your devices

Raymarine SeaTalk NG to NMEA 2000 adaptor cablesRaymarine uses SeaTalk NG connectors. To join them to standard NMEA 2000 cabling you need SeaTalk NG ↔ DeviceNet adaptor cables.Joins SeaTalk NG to standard NMEA 2000 (DeviceNet) cabling, e.g. A06082, A06083 or A06084 (spur) or A80674/A80675 (backbone).
Victron VE.Can to NMEA 2000 micro-C male cableVictron VE.Can products join the backbone with Victron's VE.Can to NMEA 2000 micro-C cable. Don't join the two networks' power.Connects a Victron product with a VE.Can port (such as a GX device) to the NMEA 2000 backbone. Has a removable power fuse.

Check with the manufacturer before buying. Buttons open the maker's own product page unless marked as an affiliate link.

Open these devices in the checker to add the rest of your boat and get a kit list for all of it.

Frequently asked

Are Raymarine and Victron compatible?

Yes, mostly one way. We compared 6 Raymarine–Victron model pairs using only the data lists (PGNs) the makers publish. 2 have data flowing both ways, 4 one way only. Raymarine to Victron: mainly position & time. Victron to Raymarine: mainly batteries & DC power, tank levels and AC power & generator. Less certain for Victron Cerbo GX, Victron Skylla-i and Victron VE.Bus inverter/charger, because of caveats in their published list (partial list, no send/receive direction, or an older, range-wide or dealer-hosted document). Maker-specific (proprietary) messages, used for things like cross-brand autopilot control or sonar sharing, are not counted between different brands. Check with the manufacturer before buying.

What data can a Raymarine Axiom (LightHouse 4) and a Victron Cerbo GX share?

From the Raymarine Axiom (LightHouse 4) to the Victron Cerbo GX: position & time. From the Victron Cerbo GX to the Raymarine Axiom (LightHouse 4): batteries & DC power and tank levels. Based on the makers' published PGN lists.

What doesn't work between Raymarine and Victron?

Some pairs also have data that one device can use but neither sends, such as engine & propulsion; that needs another device or a gateway. The fixes on this page only name devices whose published list sends that data.

Sources

Installation sources

How we pick pages: chosen by hand from common brand combinations, not from search data. Model pairs are picked automatically from the devices in our dataset (main chartplotter of each brand plus devices that exchange data with it).

Other brand pairs

Garmin + Raymarine · Raymarine + Simrad · Lowrance + Raymarine · B&G + Raymarine · Victron + Garmin · Victron + Simrad · Victron + B&G · Yacht Devices + Raymarine · Maretron + Raymarine · All brand pairs