FurunoGarmin
Do Furuno and Garmin work together?
Yes, for standard boat data. We compared 4 Furuno–Garmin model pairs using only the data lists (PGNs) the makers publish. 2 have data flowing both ways, 2 one way only. Furuno to Garmin: mainly position & time, heading & motion, boat speed & log and depth. Garmin to Furuno: mainly position & time, heading & motion, boat speed & log and depth. Maker-specific (proprietary) messages, used for things like cross-brand autopilot control or sonar sharing, are not counted between different brands.
Boat electronics share data over NMEA 2000 using numbered messages called PGNs (Parameter Group Numbers). Data only “flows” here when one maker's manual says its device sends a message and the other maker's manual says its device receives the same message.
These are compatible:
- Furuno TZtouchXL / TZTBB + Garmin GPSMAP x3 (7x3–16x3)Share position & time, heading & motion, boat speed & log and 7 more (both ways).
- Furuno TZtouchXL / TZTBB + Garmin GND 10Share position & time, heading & motion, boat speed & log and 3 more (both ways).
- Furuno GP-330B + Garmin GPSMAP x3 (7x3–16x3)Share position & time (one way, Furuno GP-330B → Garmin GPSMAP x3 (7x3–16x3)).
- Furuno GP-330B + Garmin GNX 20/21Share position & time (one way, Furuno GP-330B → Garmin GNX 20/21).
“Compatible” here means they connect over NMEA 2000 and share data according to the makers' published lists. Maker-specific messages (e.g. cross-brand autopilot control) are not counted.
Model by model
Data types each way, from the makers' published lists. Tap a pair to open it in the checker.
Furuno TZtouchXL / TZTBB + Garmin GPSMAP x3 (7x3–16x3) Shares data both ways
Chartplotter / MFD + Chartplotter / MFD · Check this pair
| Data type | Furuno TZtouchXL / TZTBB → Garmin GPSMAP x3 (7x3–16x3) | Garmin GPSMAP x3 (7x3–16x3) → Furuno TZtouchXL / TZTBB |
|---|---|---|
| Position & time | Flows 3 messages: Position, Rapid Update (129025); COG & SOG, Rapid Update (129026); GNSS Position Data (129029) | Flows 4 messages: Position, Rapid Update (129025); COG & SOG, Rapid Update (129026); GNSS Position Data (129029); +1 more |
| Heading & motion | Flows 3 messages: Vessel Heading (127250); Rate of Turn (127251); Attitude (127257) | Flows 2 messages: Vessel Heading (127250); Magnetic Variation (127258) |
| Boat speed & log | Flows 2 messages: Speed (128259); Distance Log (128275) | Flows 1 message: Speed (128259) |
| Depth | Flows 1 message: Water Depth (128267) | Flows 1 message: Water Depth (128267) |
| Wind | Flows 1 message: Wind Data (130306) | Flows 1 message: Wind Data (130306) |
| Temperature & weather | Flows 5 messages: Environmental Parameters (obsolete) (130310); Temperature (130312); Humidity (130313); +2 more | Flows 2 messages: Environmental Parameters (obsolete) (130310); Temperature (130312) |
| Route & waypoint navigation | Flows 3 messages: Cross Track Error (129283); Navigation Data (129284); Navigation - Route/WP Information (129285) | Different message : both handle this data but list different PGNs |
| Engine & propulsion | — | Flows 3 messages: Engine Parameters, Rapid Update (127488); Engine Parameters, Dynamic (127489); Transmission Parameters, Dynamic (127493) |
| Batteries & DC power | — | Flows 1 message: Battery Status (127508) |
| Tank levels | — | Flows 1 message: Fluid Level (127505) |
| Switching, lighting & trim | — | Different message : both handle this data but list different PGNs |
| Alerts & alarms | Different message : both handle this data but list different PGNs | Different message : both handle this data but list different PGNs |
Furuno TZtouchXL / TZTBB + Garmin GND 10 Shares data both ways
Chartplotter / MFD + Gateway / converter · Check this pair
| Data type | Furuno TZtouchXL / TZTBB → Garmin GND 10 | Garmin GND 10 → Furuno TZtouchXL / TZTBB |
|---|---|---|
| Position & time | Flows 2 messages: COG & SOG, Rapid Update (129026); GNSS Position Data (129029) | Flows 3 messages: COG & SOG, Rapid Update (129026); GNSS Position Data (129029); GNSS Sats in View (129540) |
| Heading & motion | Flows 3 messages: Vessel Heading (127250); Attitude (127257); Magnetic Variation (127258) | Flows 2 messages: Vessel Heading (127250); Attitude (127257) |
| Boat speed & log | Flows 1 message: Speed (128259) | Flows 1 message: Speed (128259) |
| Depth | Flows 1 message: Water Depth (128267) | Flows 1 message: Water Depth (128267) |
| Wind | Flows 1 message: Wind Data (130306) | Flows 1 message: Wind Data (130306) |
| Temperature & weather | Flows 4 messages: Environmental Parameters (obsolete) (130310); Temperature (130312); Actual Pressure (130314); +1 more | Flows 5 messages: Environmental Parameters (obsolete) (130310); Environmental Parameters (130311); Temperature (130312); +2 more |
Furuno GP-330B + Garmin GPSMAP x3 (7x3–16x3) One way only
GPS / heading sensor + Chartplotter / MFD · Check this pair
| Data type | Furuno GP-330B → Garmin GPSMAP x3 (7x3–16x3) | Garmin GPSMAP x3 (7x3–16x3) → Furuno GP-330B |
|---|---|---|
| Position & time | Flows 5 messages: Position, Rapid Update (129025); COG & SOG, Rapid Update (129026); GNSS Position Data (129029); +2 more | — |
| Heading & motion | Different message : both handle this data but list different PGNs | — |
Furuno GP-330B + Garmin GNX 20/21 One way only
GPS / heading sensor + Instrument display · Check this pair
| Data type | Furuno GP-330B → Garmin GNX 20/21 | Garmin GNX 20/21 → Furuno GP-330B |
|---|---|---|
| Position & time | Flows 4 messages: Position, Rapid Update (129025); COG & SOG, Rapid Update (129026); GNSS Position Data (129029); +1 more | — |
| Heading & motion | Different message : both handle this data but list different PGNs | — |
Gaps and fixes
Data that both devices in a pair handle, but that one can use and the other doesn't send (or sends as a different message number). Fixes only name devices whose published list sends that data.
- Heading & motion: different message numbers for Furuno GP-330B + Garmin GPSMAP x3 (7x3–16x3) and Furuno GP-330B + Garmin GNX 20/21. Could come from: Garmin Reactor 40 CCU; Maretron SSC300; Actisense NGW-1 (converts from an existing NMEA 0183 device); Garmin GPS 24xd.
- Autopilot & steering: Furuno TZtouchXL / TZTBB and Garmin GPSMAP x3 (7x3–16x3) can use it, but the paired device doesn't send it. Could come from: Simrad NAC-2; Raymarine EV-1; Actisense NGW-1 (converts from an existing NMEA 0183 device).Simrad NAC-2 autopilot computerSends autopilot & steering (its maker's list says so).
- AIS & targets: Furuno TZtouchXL / TZTBB and Garmin GPSMAP x3 (7x3–16x3) can use it, but the paired device doesn't send it. Could come from: Garmin AIS 800; Raymarine AIS700; Yacht Devices YDWG-02 (converts from an existing NMEA 0183 device).Garmin AIS 800 blackbox transceiverSends AIS & targets (its maker's list says so).
- VHF, DSC & MOB: Furuno TZtouchXL / TZTBB and Garmin GPSMAP x3 (7x3–16x3) can use it, but the paired device doesn't send it. Could come from: Garmin VHF 315; Icom IC-M510 EVO; Yacht Devices YDWG-02 (converts from an existing NMEA 0183 device).Garmin VHF 315 marine radioSends VHF, DSC & MOB (its maker's list says so).
Check with the manufacturer before buying. Buttons open the maker's own product page unless marked as an affiliate link.
No published data list found yet for: Garmin GHC 50 autopilot helm control, Garmin gWind wind transducer and Garmin Steadycast heading sensor. These are shown as unknown in the checker.
Also in the checker: Garmin GPSMAP 8400/8600/8700, Garmin GPSMAP 10x2/12x2, Garmin GPSMAP 7400/7600, Garmin ECHOMAP UHD2 sv, Garmin ECHOMAP UHD, Garmin GMI 20, Garmin GPS 24xd, Garmin Reactor 40 CCU, Garmin VHF 315, Garmin AIS 800, Garmin GHC 20, Garmin GHP 12 CCU.
Installing these together
Both connect to one NMEA 2000 backbone. Full basics, with sources, are in the NMEA 2000 install guide.
What you need
- A backbone with one T-connector per device, plus one for the power cable. (Garmin support)
- Drop cables of 6 m (20 ft) or less from each T to its device. (Garmin N2K reference, B&G Zeus S manual)
- Exactly two terminators, one at each end. Don't add more if the boat's backbone already has them. (Garmin N2K reference)
- One fused 12 V power tap, switched so it doesn't drain the battery. (Garmin N2K reference, B&G Zeus S manual, Raymarine docs)
- Furuno: Furuno uses standard Micro tees, cables and terminators. A dedicated power tee uses two male terminators instead of one male and one female. (Furuno guide)
- Garmin: Garmin uses standard NMEA 2000 micro connectors. A backbone with mini connectors needs an adapter. (Garmin N2K reference)
- Garmin: The Garmin NMEA 2000 power cable has a 3 A fuse and goes on the top (middle) port of a T-connector, switched so it doesn't drain the battery. (Garmin N2K reference)
Set-up on the display
- Furuno: Furuno says the first job after installing is instancing: set device and data instances on the TZtouch display. (Furuno guide)
- Garmin: Check what the plotter sees: Options (or Settings) > Communications > NMEA 2000 Setup > Device List. (Garmin support)
- Garmin: Update the plotter's software (ActiveCaptain app or Garmin Express) when you add a device. (Garmin manual)
- Update each device's software. Garmin says an update may be needed when you add a device or accessory. (Garmin manual, Raymarine docs)
How long? Estimate
No maker publishes a DIY time. Our rough estimate: 1.5–3 hours to add one device to an existing, healthy backbone, or 4–7 hours to build a new small backbone for 2–4 devices.
How we got it: plan the backbone and measure (Garmin says to start with a diagram), run one drop cable, fit Ts, terminators and the power tap, update software, then select sources and test, plus instance setup. It doesn't include mounting displays or transducers, cutting holes or long cable runs through the boat. If in doubt, use a qualified (NMEA-certified) installer. (Garmin N2K reference)
Common problems
Only from makers' manuals, support articles and installation guides.
- Similar devices mixed up. Without correct device and data instances, data from duplicate devices gets confused. Furuno calls instancing the most important step for a stable network. (Furuno guide)
- Wrong number of terminators. There must be exactly two 120 Ω terminators, one at each end of the backbone. With the network power off, CAN-H to CAN-L should read about 60 Ω. 120 Ω means one is missing; 40 Ω means there's one too many. (Garmin support, Actisense)
- Low network voltage. Devices need at least 9 V at the far end of the backbone (Navico says errors can start below 9.5 V). On long or busy backbones, move the power tap towards the middle. (Actisense, Simrad NSS 4 manual, Garmin N2K reference)
- Duplicate data sources. Two GPS units or two depth sensors on one network can conflict. Pick the preferred source on the display. Raymarine says to have only one source per data type unless a product's documents allow more. (Raymarine 81300, Raymarine LightHouse 4, B&G NEON notes)
- Maker-only features don't cross brands. Standard data flows, but a Garmin plotter can't engage or control a third-party autopilot: it only sends Go To / Route To navigation data. Raymarine Evolution pilots list only Raymarine controllers and displays as control heads. (Garmin support, Raymarine 87472)
More checks (power feeds, devices not showing up): install guide. Check with the manufacturer or a qualified installer before buying or drilling.
What you'll need to connect this
Example: a Furuno TZtouchXL / TZTBB and a Garmin GPSMAP x3 (7x3–16x3) on a new backbone.
For 2 devices on one NMEA 2000 backbone. From the makers' install guides; see the install guide for sources. Quantities are estimates
- 1 runBackbone cableLong enough to pass every device; the length depends on your boat. Plan it on a sketch first.
- 3est.T-connectorsOne per device, plus one for the power cable.
- 2est.Drop cablesOne per device, 6 m (20 ft) or less each. Many devices come with a T-connector and drop cable in the box (Garmin lists them for the GPS 24xd, AIS 800 and GND 10), so check before you buy.
- 2TerminatorsExactly two, one at each end. Skip them if your backbone already has two.
- 1Power cable (power tap)One fused 12 V feed, in one place only, switched so it doesn't drain the battery.
One kit covers the basics
Check with the manufacturer before buying. Buttons open the maker's own product page unless marked as an affiliate link.
Open these devices in the checker to add the rest of your boat and get a kit list for all of it.
Frequently asked
Are Furuno and Garmin compatible?
Yes, for standard boat data. We compared 4 Furuno–Garmin model pairs using only the data lists (PGNs) the makers publish. 2 have data flowing both ways, 2 one way only. Furuno to Garmin: mainly position & time, heading & motion, boat speed & log and depth. Garmin to Furuno: mainly position & time, heading & motion, boat speed & log and depth. Maker-specific (proprietary) messages, used for things like cross-brand autopilot control or sonar sharing, are not counted between different brands. Check with the manufacturer before buying.
What data can a Furuno TZtouchXL / TZTBB and a Garmin GPSMAP x3 (7x3–16x3) share?
From the Furuno TZtouchXL / TZTBB to the Garmin GPSMAP x3 (7x3–16x3): position & time, heading & motion, boat speed & log, depth, wind, temperature & weather and route & waypoint navigation. From the Garmin GPSMAP x3 (7x3–16x3) to the Furuno TZtouchXL / TZTBB: position & time, heading & motion, boat speed & log, depth, wind, temperature & weather, engine & propulsion, batteries & DC power and tank levels. Based on the makers' published PGN lists.
What doesn't work between Furuno and Garmin?
For heading & motion, some Furuno and Garmin models on this page list different message numbers (PGNs), so that data may not show up. Some pairs also have data that one device can use but neither sends, such as autopilot & steering, AIS & targets and VHF, DSC & MOB; that needs another device or a gateway. The fixes on this page only name devices whose published list sends that data.
Sources
- Furuno TZtouchXL / TZTBB (Furuno NavNet TZtouchXL black box (TZTBBX)): NavNet TZtouchXL TZTBBX Installation Manual, Pub. No. IME-45290-E1. manufacturer. Last checked 2026-11-19. Confidence: high; list complete.
- Garmin GPSMAP x3 (7x3–16x3) (Garmin GPSMAP 7x3/9x3/12x3/15x3/16x3 series): GPSMAP Owner's Manual 16x3, 15x3, 12x3, 9x3, 7x3 – NMEA 2000 PGN Information, v16, September 2026. manufacturer. Last checked 2026-11-19. Confidence: high; list complete.
- Garmin GND 10 (Garmin GND 10 (Nexus/gWind bridge)): GND 10 Installation Instructions, GUID-3A999057 v2, February 2021. manufacturer. Last checked 2026-11-19. Confidence: high; list complete.
- Furuno GP-330B (Furuno GP-330B GPS/WAAS sensor): GP330B NMEA 2000 PGNs, not shown. manufacturer. Last checked 2026-11-19. Confidence: high; list complete.
- Garmin GNX 20/21 (Garmin GNX 20 / GNX 21): GNX 20/21 Installation Instructions, GUID-E313CF8B v8, January 2025. manufacturer. Last checked 2026-11-19. Confidence: high; list complete.
Installation sources
- Garmin Support: NMEA 2000 Troubleshooting on Garmin Marine Devices. Checked 2026-11-19.
- Garmin: Technical Reference for Garmin NMEA 2000 Products. Checked 2026-11-19.
- Navico Group (B&G): B&G Zeus S Installation Manual 988-12624-001 – NMEA 2000 planning. Checked 2026-11-19.
- Raymarine: SeaTalk NG cables and accessories. Checked 2026-11-19.
- Furuno: Furuno NMEA 2000 Installation Guide (Furuno USA, 02/2021). Checked 2026-11-19.
- Garmin: GPSMAP x3 Owner's Manual – Software Updates. Checked 2026-11-19.
- Raymarine: Software updates (product installation instructions). Checked 2026-11-19.
- Actisense: How to build & troubleshoot an NMEA 2000 network. Checked 2026-11-19.
- Navico Group (Simrad): Simrad NSS 4 Installation Manual – NMEA 2000 planning (distributor-hosted copy). Checked 2026-11-19.
- Garmin: Technical Reference for Garmin NMEA 2000 Products – Power Distribution and Balance. Checked 2026-11-19.
- Raymarine: SeaTalk NG Reference Manual 81300 (dealer-hosted copy). Checked 2026-11-19.
- Raymarine: LightHouse 4 – Data sources settings menu. Checked 2026-11-19.
- Navico Group (B&G): NEON 2.5 software release notes (B&G Zeus S / SR). Checked 2026-11-19.
- Garmin Support: Using Third-Party Marine Autopilots with a Garmin Chartplotter. Checked 2026-11-19.
- Raymarine: Evolution EV-1 Autopilot Installation Instructions 87472 Rev 2 (12-2025), ch. 3–4. Checked 2026-11-19.
How we pick pages: chosen by hand from common brand combinations, not from search data. Model pairs are picked automatically from the devices in our dataset (main chartplotter of each brand plus devices that exchange data with it).
Other brand pairs
Garmin + Raymarine · Simrad + Garmin · Lowrance + Garmin · B&G + Garmin · Humminbird + Garmin · Victron + Garmin · Yacht Devices + Garmin · Actisense + Garmin · Maretron + Garmin · All brand pairs