SimradGarmin
Do Simrad and Garmin work together?
Yes, for standard boat data. We compared 6 Simrad–Garmin model pairs using only the data lists (PGNs) the makers publish. 3 have data flowing both ways, 3 one way only. Simrad to Garmin: mainly autopilot & steering, position & time, heading & motion and boat speed & log. Garmin to Simrad: mainly position & time, heading & motion, boat speed & log and depth. Less certain for Simrad NSX, Simrad NAC-2 and Simrad NAC-3, because of caveats in their published list (partial list, no send/receive direction, or an older, range-wide or dealer-hosted document). Maker-specific (proprietary) messages, used for things like cross-brand autopilot control or sonar sharing, are not counted between different brands.
Boat electronics share data over NMEA 2000 using numbered messages called PGNs (Parameter Group Numbers). Data only “flows” here when one maker's manual says its device sends a message and the other maker's manual says its device receives the same message.
These are compatible:
- Simrad NSX + Garmin GPSMAP x3 (7x3–16x3)Share position & time, heading & motion, boat speed & log and 8 more (both ways).
- Simrad NSX + Garmin GND 10Share position & time, heading & motion, boat speed & log and 3 more (both ways).
- Simrad NAC-2 + Garmin GPSMAP x3 (7x3–16x3)Share position & time, heading & motion, boat speed & log and 4 more (both ways).
- Simrad NAC-2 + Garmin GNX 20/21Share autopilot & steering (one way, Simrad NAC-2 → Garmin GNX 20/21).
- Simrad NAC-3 + Garmin GNX 20/21Share autopilot & steering (one way, Simrad NAC-3 → Garmin GNX 20/21).
- Simrad NAC-3 + Garmin GMI 20Share autopilot & steering (one way, Simrad NAC-3 → Garmin GMI 20).
“Compatible” here means they connect over NMEA 2000 and share data according to the makers' published lists. Maker-specific messages (e.g. cross-brand autopilot control) are not counted.
Model by model
Data types each way, from the makers' published lists. Tap a pair to open it in the checker.
Simrad NSX + Garmin GPSMAP x3 (7x3–16x3) Shares data both ways
Chartplotter / MFD + Chartplotter / MFD · Check this pair
| Data type | Simrad NSX → Garmin GPSMAP x3 (7x3–16x3) | Garmin GPSMAP x3 (7x3–16x3) → Simrad NSX |
|---|---|---|
| Position & time | Flows 5 messages: Position, Rapid Update (129025); COG & SOG, Rapid Update (129026); GNSS Position Data (129029); +2 more | Flows 5 messages: Position, Rapid Update (129025); COG & SOG, Rapid Update (129026); GNSS Position Data (129029); +2 more |
| Heading & motion | Flows 1 message: Vessel Heading (127250) | Flows 2 messages: Vessel Heading (127250); Magnetic Variation (127258) |
| Boat speed & log | Flows 3 messages: Speed (128259); Distance Log (128275); Vessel Speed Components (130578) | Flows 1 message: Speed (128259) |
| Depth | Flows 1 message: Water Depth (128267) | Flows 1 message: Water Depth (128267) |
| Wind | Flows 1 message: Wind Data (130306) | Flows 1 message: Wind Data (130306) |
| Temperature & weather | Flows 3 messages: Environmental Parameters (obsolete) (130310); Environmental Parameters (130311); Temperature (130312) | Flows 2 messages: Environmental Parameters (obsolete) (130310); Temperature (130312) |
| Route & waypoint navigation | Flows 3 messages: Cross Track Error (129283); Navigation Data (129284); Navigation - Route/WP Information (129285) | Flows 2 messages: Cross Track Error (129283); Navigation Data (129284) |
| Autopilot & steering | Flows 1 message: Heading/Track control (127237) | — |
| Engine & propulsion | — | Flows 3 messages: Engine Parameters, Rapid Update (127488); Engine Parameters, Dynamic (127489); Transmission Parameters, Dynamic (127493) |
| Batteries & DC power | — | Flows 1 message: Battery Status (127508) |
| Tank levels | — | Flows 1 message: Fluid Level (127505) |
| Switching, lighting & trim | Different message : both handle this data but list different PGNs | Different message : both handle this data but list different PGNs |
Check before buying. Simrad NSX: Medium confidence: dealer mirror of manufacturer PDF. Its list Tell us if it worked
Simrad NSX + Garmin GND 10 Shares data both ways
Chartplotter / MFD + Gateway / converter · Check this pair
| Data type | Simrad NSX → Garmin GND 10 | Garmin GND 10 → Simrad NSX |
|---|---|---|
| Position & time | Flows 3 messages: COG & SOG, Rapid Update (129026); GNSS Position Data (129029); GNSS Sats in View (129540) | Flows 3 messages: COG & SOG, Rapid Update (129026); GNSS Position Data (129029); GNSS Sats in View (129540) |
| Heading & motion | Flows 2 messages: Vessel Heading (127250); Magnetic Variation (127258) | Flows 2 messages: Vessel Heading (127250); Attitude (127257) |
| Boat speed & log | Flows 1 message: Speed (128259) | Flows 1 message: Speed (128259) |
| Depth | Flows 1 message: Water Depth (128267) | Flows 1 message: Water Depth (128267) |
| Wind | Flows 1 message: Wind Data (130306) | Flows 1 message: Wind Data (130306) |
| Temperature & weather | Flows 3 messages: Environmental Parameters (obsolete) (130310); Environmental Parameters (130311); Temperature (130312) | Flows 5 messages: Environmental Parameters (obsolete) (130310); Environmental Parameters (130311); Temperature (130312); +2 more |
Check before buying. Simrad NSX: Medium confidence: dealer mirror of manufacturer PDF. Its list Tell us if it worked
Simrad NAC-2 + Garmin GPSMAP x3 (7x3–16x3) Shares data both ways
Autopilot + Chartplotter / MFD · Check this pair
| Data type | Simrad NAC-2 → Garmin GPSMAP x3 (7x3–16x3) | Garmin GPSMAP x3 (7x3–16x3) → Simrad NAC-2 |
|---|---|---|
| Position & time | — | Flows 3 messages: Position, Rapid Update (129025); COG & SOG, Rapid Update (129026); GNSS Position Data (129029) |
| Heading & motion | — | Flows 2 messages: Vessel Heading (127250); Magnetic Variation (127258) |
| Boat speed & log | — | Flows 1 message: Speed (128259) |
| Depth | — | Flows 1 message: Water Depth (128267) |
| Wind | — | Flows 1 message: Wind Data (130306) |
| Route & waypoint navigation | — | Flows 2 messages: Cross Track Error (129283); Navigation Data (129284) |
| Autopilot & steering | Flows 2 messages: Heading/Track control (127237); Rudder (127245) | — |
Check before buying. Simrad NAC-2: Medium confidence: retailer mirror of manufacturer PDF. Its list Tell us if it worked
Simrad NAC-2 + Garmin GNX 20/21 One way only
Autopilot + Instrument display · Check this pair
| Data type | Simrad NAC-2 → Garmin GNX 20/21 | Garmin GNX 20/21 → Simrad NAC-2 |
|---|---|---|
| Autopilot & steering | Flows 1 message: Rudder (127245) | — |
Check before buying. Simrad NAC-2: Medium confidence: retailer mirror of manufacturer PDF. Its list Tell us if it worked
Simrad NAC-3 + Garmin GNX 20/21 One way only
Autopilot + Instrument display · Check this pair
| Data type | Simrad NAC-3 → Garmin GNX 20/21 | Garmin GNX 20/21 → Simrad NAC-3 |
|---|---|---|
| Autopilot & steering | Flows 1 message: Rudder (127245) | — |
Check before buying. Simrad NAC-3: Medium confidence: retailer mirror of manufacturer PDF. Its list Tell us if it worked
Simrad NAC-3 + Garmin GMI 20 One way only
Autopilot + Instrument display · Check this pair
| Data type | Simrad NAC-3 → Garmin GMI 20 | Garmin GMI 20 → Simrad NAC-3 |
|---|---|---|
| Autopilot & steering | Flows 1 message: Rudder (127245) | — |
Check before buying. Simrad NAC-3: Medium confidence: retailer mirror of manufacturer PDF. Its list Tell us if it worked
How to check before buying
- Open the installation manual and find its NMEA 2000 PGN list: is the data listed as sent (transmit) on one device and received on the other?
- Read the latest firmware or software release notes; makers often add data in updates.
- Ask your dealer or the maker's support to confirm it with your exact models.
“Tell us if it worked” opens your email app. Reports tell us what to look into; we only mark something compatible when a maker's own document says so.
Gaps and fixes
Data that both devices in a pair handle, but that one can use and the other doesn't send (or sends as a different message number). Fixes only name devices whose published list sends that data.
- Position & time: Simrad NAC-2, Garmin GNX 20/21, Simrad NAC-3 and Garmin GMI 20 can use it, but the paired device doesn't send it. Could come from: Garmin GPS 24xd; Garmin AIS 800; Yacht Devices YDWG-02 (converts from an existing NMEA 0183 device).Garmin GPS 24xd NMEA 2000Sends position & time (its maker's list says so).
- Heading & motion: Simrad NAC-2, Garmin GNX 20/21, Simrad NAC-3 and Garmin GMI 20 can use it, but the paired device doesn't send it. Could come from: Garmin GPS 24xd; Garmin Reactor 40 CCU; Yacht Devices YDWG-02 (converts from an existing NMEA 0183 device).Garmin GPS 24xd NMEA 2000Sends heading & motion (its maker's list says so).
- Boat speed & log: Simrad NAC-2, Garmin GNX 20/21, Simrad NAC-3 and Garmin GMI 20 can use it, but the paired device doesn't send it. Could come from: Maretron GPS200; Maretron DST110; Yacht Devices YDWG-02 (converts from an existing NMEA 0183 device).Maretron GPS200 GPS antenna/receiverSends boat speed & log (its maker's list says so).
- Depth: Simrad NAC-2, Garmin GNX 20/21, Simrad NAC-3 and Garmin GMI 20 can use it, but the paired device doesn't send it. Could come from: Maretron DST110; Garmin GND 10; Actisense NGW-1 (converts from an existing NMEA 0183 device).Maretron DST110 depth/speed/temperatureSends depth (its maker's list says so).
- Wind: Simrad NAC-2, Garmin GNX 20/21, Simrad NAC-3 and Garmin GMI 20 can use it, but the paired device doesn't send it. Could come from: Maretron WSO100; Garmin GND 10; Actisense NGW-1 (converts from an existing NMEA 0183 device).Maretron WSO100 wind and weather stationSends wind (its maker's list says so).
- Route & waypoint navigation: Simrad NAC-2, Garmin GNX 20/21, Simrad NAC-3 and Garmin GMI 20 can use it, but the paired device doesn't send it. Could come from: Maretron USB100; Actisense NGW-1 (converts from an existing NMEA 0183 device).Maretron USB100 NMEA 2000 / USB gatewaySends route & waypoint navigation (its maker's list says so).
- AIS & targets: Simrad NSX and Garmin GPSMAP x3 (7x3–16x3) can use it, but the paired device doesn't send it. Could come from: Garmin AIS 800; Raymarine AIS700; Yacht Devices YDWG-02 (converts from an existing NMEA 0183 device).Garmin AIS 800 blackbox transceiverSends AIS & targets (its maker's list says so).
- VHF, DSC & MOB: Simrad NSX and Garmin GPSMAP x3 (7x3–16x3) can use it, but the paired device doesn't send it. Could come from: Garmin VHF 315; Icom IC-M510 EVO; Yacht Devices YDWG-02 (converts from an existing NMEA 0183 device).Garmin VHF 315 marine radioSends VHF, DSC & MOB (its maker's list says so).
Check with the manufacturer before buying. Buttons open the maker's own product page unless marked as an affiliate link.
No published data list found yet for: Garmin GHC 50 autopilot helm control, Garmin gWind wind transducer and Garmin Steadycast heading sensor. These are shown as unknown in the checker.
Also in the checker: Simrad NSS 4, Simrad AP44, Garmin GPSMAP 8400/8600/8700, Garmin GPSMAP 10x2/12x2, Garmin GPSMAP 7400/7600, Garmin ECHOMAP UHD2 sv, Garmin ECHOMAP UHD, Garmin GPS 24xd, Garmin Reactor 40 CCU, Garmin VHF 315, Garmin AIS 800, Garmin GHC 20, Garmin GHP 12 CCU.
Installing these together
Both connect to one NMEA 2000 backbone. Full basics, with sources, are in the NMEA 2000 install guide.
What you need
- A backbone with one T-connector per device, plus one for the power cable. (Garmin support)
- Drop cables of 6 m (20 ft) or less from each T to its device. (Garmin N2K reference, B&G Zeus S manual)
- Exactly two terminators, one at each end. Don't add more if the boat's backbone already has them. (Garmin N2K reference)
- One fused 12 V power tap, switched so it doesn't drain the battery. (Garmin N2K reference, B&G Zeus S manual, Raymarine docs)
- Simrad: Current Navico displays have a standard Micro-C NMEA 2000 port (the B&G Zeus S manual shows this). Older Simrad SimNet products need a SimNet to Micro-C cable (Simrad SKU 24005729). (B&G Zeus S manual, Simrad)
- Simrad: Navico: the network needs its own 12 V supply with a 3 A fuse, not shared with the engine-start battery, autopilot computer or bow thruster. (B&G Zeus S manual)
- Garmin: Garmin uses standard NMEA 2000 micro connectors. A backbone with mini connectors needs an adapter. (Garmin N2K reference)
- Garmin: The Garmin NMEA 2000 power cable has a 3 A fuse and goes on the top (middle) port of a T-connector, switched so it doesn't drain the battery. (Garmin N2K reference)
Set-up on the display
- Simrad: On NEON displays (B&G Zeus S/SR release notes): Settings > Boat network > Sources > Auto select all sources, with everything powered on. Check your Simrad manual for the same menu. (B&G NEON notes)
- Garmin: Check what the plotter sees: Options (or Settings) > Communications > NMEA 2000 Setup > Device List. (Garmin support)
- Garmin: Update the plotter's software (ActiveCaptain app or Garmin Express) when you add a device. (Garmin manual)
- Update each device's software. Garmin says an update may be needed when you add a device or accessory. (Garmin manual, Raymarine docs)
How long? Estimate
No maker publishes a DIY time. Our rough estimate: 1–2 hours to add one device to an existing, healthy backbone, or 3–6 hours to build a new small backbone for 2–4 devices.
How we got it: plan the backbone and measure (Garmin says to start with a diagram), run one drop cable, fit Ts, terminators and the power tap, update software, then select sources and test. It doesn't include mounting displays or transducers, cutting holes or long cable runs through the boat. If in doubt, use a qualified (NMEA-certified) installer. (Garmin N2K reference)
Common problems
Only from makers' manuals, support articles and installation guides.
- Position or depth lost after a software update. Navico says data sources may need resetting after an update; run Auto select all sources again. (B&G NEON notes)
- Garmin plotter not talking to a Simrad autopilot. Garmin's fix: check the wiring, confirm the pilot is in the device list, then turn NMEA 2000 Output Bridging on (older plotters). (Garmin support)
- Garmin autopilot with another brand's heading sensor. Garmin recommends the autopilot CCU's own compass. A third-party GPS compass can deliver data erratically. You can pick a preferred heading source in Autopilot Setup > Preferred Sources. (Garmin manual, Garmin support)
- Garmin autopilot needs GPS. A Reactor 40 shows 'Lost GPS' if it doesn't see PGN 129025 or 129540. Routes can't be started from a third-party plotter; use the GHC controller. (Garmin support)
- Wrong number of terminators. There must be exactly two 120 Ω terminators, one at each end of the backbone. With the network power off, CAN-H to CAN-L should read about 60 Ω. 120 Ω means one is missing; 40 Ω means there's one too many. (Garmin support, Actisense)
- Low network voltage. Devices need at least 9 V at the far end of the backbone (Navico says errors can start below 9.5 V). On long or busy backbones, move the power tap towards the middle. (Actisense, Simrad NSS 4 manual, Garmin N2K reference)
- Duplicate data sources. Two GPS units or two depth sensors on one network can conflict. Pick the preferred source on the display. Raymarine says to have only one source per data type unless a product's documents allow more. (Raymarine 81300, Raymarine LightHouse 4, B&G NEON notes)
- Maker-only features don't cross brands. Standard data flows, but a Garmin plotter can't engage or control a third-party autopilot: it only sends Go To / Route To navigation data. Raymarine Evolution pilots list only Raymarine controllers and displays as control heads. (Garmin support, Raymarine 87472)
More checks (power feeds, devices not showing up): install guide. Check with the manufacturer or a qualified installer before buying or drilling.
What you'll need to connect this
Example: a Simrad NSX and a Garmin GPSMAP x3 (7x3–16x3) on a new backbone.
For 2 devices on one NMEA 2000 backbone. From the makers' install guides; see the install guide for sources. Quantities are estimates
- 1 runBackbone cableLong enough to pass every device; the length depends on your boat. Plan it on a sketch first.
- 3est.T-connectorsOne per device, plus one for the power cable.
- 2est.Drop cablesOne per device, 6 m (20 ft) or less each. Many devices come with a T-connector and drop cable in the box (Garmin lists them for the GPS 24xd, AIS 800 and GND 10), so check before you buy.
- 2TerminatorsExactly two, one at each end. Skip them if your backbone already has two.
- 1Power cable (power tap)One fused 12 V feed, in one place only, switched so it doesn't drain the battery.
One kit covers the basics
Brand adapters for your devices
Check with the manufacturer before buying. Buttons open the maker's own product page unless marked as an affiliate link.
Open these devices in the checker to add the rest of your boat and get a kit list for all of it.
Frequently asked
Are Simrad and Garmin compatible?
Yes, for standard boat data. We compared 6 Simrad–Garmin model pairs using only the data lists (PGNs) the makers publish. 3 have data flowing both ways, 3 one way only. Simrad to Garmin: mainly autopilot & steering, position & time, heading & motion and boat speed & log. Garmin to Simrad: mainly position & time, heading & motion, boat speed & log and depth. Less certain for Simrad NSX, Simrad NAC-2 and Simrad NAC-3, because of caveats in their published list (partial list, no send/receive direction, or an older, range-wide or dealer-hosted document). Maker-specific (proprietary) messages, used for things like cross-brand autopilot control or sonar sharing, are not counted between different brands. Check with the manufacturer before buying.
What data can a Simrad NSX and a Garmin GPSMAP x3 (7x3–16x3) share?
From the Simrad NSX to the Garmin GPSMAP x3 (7x3–16x3): position & time, heading & motion, boat speed & log, depth, wind, temperature & weather, route & waypoint navigation and autopilot & steering. From the Garmin GPSMAP x3 (7x3–16x3) to the Simrad NSX: position & time, heading & motion, boat speed & log, depth, wind, temperature & weather, route & waypoint navigation, engine & propulsion, batteries & DC power and tank levels. Based on the makers' published PGN lists.
What doesn't work between Simrad and Garmin?
Some pairs also have data that one device can use but neither sends, such as AIS & targets, VHF, DSC & MOB, position & time and heading & motion; that needs another device or a gateway. The fixes on this page only name devices whose published list sends that data.
Can a Garmin chartplotter steer a Simrad autopilot?
The published lists show position & time, heading & motion, boat speed & log, depth, wind and route & waypoint navigation flowing from the Garmin GPSMAP x3 (7x3–16x3) to the Simrad NAC-2. They don't say whether the autopilot can be engaged or steered from the other brand's screen, and maker-specific control messages are not counted between brands. Check with the manufacturer before buying.
Sources
- Simrad NSX (Simrad (Navico) NSX chartplotter series): Simrad NSX Installation Manual 988-12613-004, 988-12613-004. dealer mirror of manufacturer PDF. Last checked 2026-11-19. Confidence: medium; list complete.
- Garmin GPSMAP x3 (7x3–16x3) (Garmin GPSMAP 7x3/9x3/12x3/15x3/16x3 series): GPSMAP Owner's Manual 16x3, 15x3, 12x3, 9x3, 7x3 – NMEA 2000 PGN Information, v16, September 2026. manufacturer. Last checked 2026-11-19. Confidence: high; list complete.
- Garmin GND 10 (Garmin GND 10 (Nexus/gWind bridge)): GND 10 Installation Instructions, GUID-3A999057 v2, February 2021. manufacturer. Last checked 2026-11-19. Confidence: high; list complete.
- Simrad NAC-2 (Simrad (Navico) NAC-2 autopilot computer): NAC-2/NAC-3 Commissioning Manual 000-13336-001, 000-13336-001. retailer mirror of manufacturer PDF. Last checked 2026-11-19. Confidence: medium; list complete.
- Garmin GNX 20/21 (Garmin GNX 20 / GNX 21): GNX 20/21 Installation Instructions, GUID-E313CF8B v8, January 2025. manufacturer. Last checked 2026-11-19. Confidence: high; list complete.
- Simrad NAC-3 (Simrad (Navico) NAC-3 autopilot computer): NAC-2/NAC-3 Commissioning Manual 000-13336-001, 000-13336-001. retailer mirror of manufacturer PDF. Last checked 2026-11-19. Confidence: medium; list complete.
- Garmin GMI 20 (Garmin GMI 20): GMI 20 Installation Instructions, GUID-D193C1DF v6, March 2025. manufacturer. Last checked 2026-11-19. Confidence: high; list complete.
Installation sources
- Garmin Support: NMEA 2000 Troubleshooting on Garmin Marine Devices. Checked 2026-11-19.
- Garmin: Technical Reference for Garmin NMEA 2000 Products. Checked 2026-11-19.
- Navico Group (B&G): B&G Zeus S Installation Manual 988-12624-001 – NMEA 2000 planning. Checked 2026-11-19.
- Raymarine: SeaTalk NG cables and accessories. Checked 2026-11-19.
- Simrad: SimNet to Micro-C (male) cable 0.5 m, SKU 24005729. Checked 2026-11-19.
- Navico Group (B&G): NEON 2.5 software release notes (B&G Zeus S / SR). Checked 2026-11-19.
- Garmin: GPSMAP x3 Owner's Manual – Software Updates. Checked 2026-11-19.
- Raymarine: Software updates (product installation instructions). Checked 2026-11-19.
- Garmin Support: Garmin Marine Chartplotter not Communicating with a Simrad NMEA 2000 Autopilot. Checked 2026-11-19.
- Garmin: GPSMAP x3 Owner's Manual – Selecting the Preferred Heading Source. Checked 2026-11-19.
- Garmin Support: Integrating a Garmin Marine Autopilot with a Third Party Chartplotter. Checked 2026-11-19.
- Actisense: How to build & troubleshoot an NMEA 2000 network. Checked 2026-11-19.
- Navico Group (Simrad): Simrad NSS 4 Installation Manual – NMEA 2000 planning (distributor-hosted copy). Checked 2026-11-19.
- Garmin: Technical Reference for Garmin NMEA 2000 Products – Power Distribution and Balance. Checked 2026-11-19.
- Raymarine: SeaTalk NG Reference Manual 81300 (dealer-hosted copy). Checked 2026-11-19.
- Raymarine: LightHouse 4 – Data sources settings menu. Checked 2026-11-19.
- Garmin Support: Using Third-Party Marine Autopilots with a Garmin Chartplotter. Checked 2026-11-19.
- Raymarine: Evolution EV-1 Autopilot Installation Instructions 87472 Rev 2 (12-2025), ch. 3–4. Checked 2026-11-19.
How we pick pages: chosen by hand from common brand combinations, not from search data. Model pairs are picked automatically from the devices in our dataset (main chartplotter of each brand plus devices that exchange data with it).
Other brand pairs
Garmin + Raymarine · Lowrance + Garmin · B&G + Garmin · Furuno + Garmin · Humminbird + Garmin · Raymarine + Simrad · Lowrance + Simrad · Victron + Garmin · Victron + Simrad · Yacht Devices + Garmin · Actisense + Garmin · Maretron + Garmin · All brand pairs