MaretronGarmin
Do Maretron and Garmin work together?
Yes, mostly one way. We compared 7 Maretron–Garmin model pairs using only the data lists (PGNs) the makers publish. 1 has data flowing both ways, 6 one way only. Maretron to Garmin: mainly boat speed & log, depth, temperature & weather and position & time. Garmin to Maretron: mainly position & time, heading & motion, boat speed & log and depth. Maker-specific (proprietary) messages, used for things like cross-brand autopilot control or sonar sharing, are not counted between different brands.
Boat electronics share data over NMEA 2000 using numbered messages called PGNs (Parameter Group Numbers). Data only “flows” here when one maker's manual says its device sends a message and the other maker's manual says its device receives the same message.
These are compatible:
- Maretron DSM250 + Garmin GPSMAP x3 (7x3–16x3)Share position & time, heading & motion, boat speed & log and 7 more (one way, Garmin GPSMAP x3 (7x3–16x3) → Maretron DSM250).
- Maretron USB100 + Garmin GPSMAP x3 (7x3–16x3)Share position & time, heading & motion, boat speed & log and 7 more (both ways).
- Maretron DSM250 + Garmin GND 10Share position & time, heading & motion, boat speed & log and 3 more (one way, Garmin GND 10 → Maretron DSM250).
- Maretron DST110 + Garmin GNX 20/21Share boat speed & log, depth and temperature & weather (one way, Maretron DST110 → Garmin GNX 20/21).
- Maretron DST110 + Garmin GMI 20Share boat speed & log, depth and temperature & weather (one way, Maretron DST110 → Garmin GMI 20).
- Maretron GPS200 + Garmin GNX 20/21Share position & time and boat speed & log (one way, Maretron GPS200 → Garmin GNX 20/21).
- Maretron GPS200 + Garmin GMI 20Share position & time and boat speed & log (one way, Maretron GPS200 → Garmin GMI 20).
“Compatible” here means they connect over NMEA 2000 and share data according to the makers' published lists. Maker-specific messages (e.g. cross-brand autopilot control) are not counted.
Model by model
Data types each way, from the makers' published lists. Tap a pair to open it in the checker.
Maretron USB100 + Garmin GPSMAP x3 (7x3–16x3) Shares data both ways
Gateway / converter + Chartplotter / MFD · Check this pair
| Data type | Maretron USB100 → Garmin GPSMAP x3 (7x3–16x3) | Garmin GPSMAP x3 (7x3–16x3) → Maretron USB100 |
|---|---|---|
| Position & time | — | Flows 5 messages: Position, Rapid Update (129025); COG & SOG, Rapid Update (129026); GNSS Position Data (129029); +2 more |
| Heading & motion | — | Flows 1 message: Vessel Heading (127250) |
| Boat speed & log | — | Flows 1 message: Speed (128259) |
| Depth | — | Flows 1 message: Water Depth (128267) |
| Wind | — | Flows 1 message: Wind Data (130306) |
| Temperature & weather | — | Flows 1 message: Environmental Parameters (obsolete) (130310) |
| Route & waypoint navigation | Flows 3 messages: Cross Track Error (129283); Navigation Data (129284); Navigation - Route/WP Information (129285) | — |
| Engine & propulsion | — | Flows 2 messages: Engine Parameters, Rapid Update (127488); Engine Parameters, Dynamic (127489) |
| Batteries & DC power | — | Flows 1 message: Battery Status (127508) |
| Tank levels | — | Flows 1 message: Fluid Level (127505) |
| Switching, lighting & trim | — | Different message : both handle this data but list different PGNs |
Maretron DSM250 + Garmin GPSMAP x3 (7x3–16x3) One way only
Instrument display + Chartplotter / MFD · Check this pair
| Data type | Maretron DSM250 → Garmin GPSMAP x3 (7x3–16x3) | Garmin GPSMAP x3 (7x3–16x3) → Maretron DSM250 |
|---|---|---|
| Position & time | — | Flows 5 messages: Position, Rapid Update (129025); COG & SOG, Rapid Update (129026); GNSS Position Data (129029); +2 more |
| Heading & motion | — | Flows 2 messages: Vessel Heading (127250); Magnetic Variation (127258) |
| Boat speed & log | — | Flows 1 message: Speed (128259) |
| Depth | — | Flows 1 message: Water Depth (128267) |
| Wind | — | Flows 1 message: Wind Data (130306) |
| Temperature & weather | — | Flows 2 messages: Environmental Parameters (obsolete) (130310); Temperature (130312) |
| Route & waypoint navigation | — | Flows 3 messages: Cross Track Error (129283); Navigation Data (129284); Navigation - Route/WP Information (129285) |
| Engine & propulsion | — | Flows 4 messages: Engine Parameters, Rapid Update (127488); Engine Parameters, Dynamic (127489); Transmission Parameters, Dynamic (127493); +1 more |
| Batteries & DC power | — | Flows 1 message: Battery Status (127508) |
| Tank levels | — | Flows 1 message: Fluid Level (127505) |
| Switching, lighting & trim | — | Different message : both handle this data but list different PGNs |
Maretron DSM250 + Garmin GND 10 One way only
Instrument display + Gateway / converter · Check this pair
| Data type | Maretron DSM250 → Garmin GND 10 | Garmin GND 10 → Maretron DSM250 |
|---|---|---|
| Position & time | — | Flows 3 messages: COG & SOG, Rapid Update (129026); GNSS Position Data (129029); GNSS Sats in View (129540) |
| Heading & motion | — | Flows 2 messages: Vessel Heading (127250); Attitude (127257) |
| Boat speed & log | — | Flows 1 message: Speed (128259) |
| Depth | — | Flows 1 message: Water Depth (128267) |
| Wind | — | Flows 1 message: Wind Data (130306) |
| Temperature & weather | — | Flows 5 messages: Environmental Parameters (obsolete) (130310); Environmental Parameters (130311); Temperature (130312); +2 more |
Maretron DST110 + Garmin GNX 20/21 One way only
Depth / speed sensor + Instrument display · Check this pair
| Data type | Maretron DST110 → Garmin GNX 20/21 | Garmin GNX 20/21 → Maretron DST110 |
|---|---|---|
| Boat speed & log | Flows 1 message: Speed (128259) | — |
| Depth | Flows 1 message: Water Depth (128267) | — |
| Temperature & weather | Flows 3 messages: Environmental Parameters (obsolete) (130310); Environmental Parameters (130311); Temperature (130312) | — |
Maretron DST110 + Garmin GMI 20 One way only
Depth / speed sensor + Instrument display · Check this pair
| Data type | Maretron DST110 → Garmin GMI 20 | Garmin GMI 20 → Maretron DST110 |
|---|---|---|
| Boat speed & log | Flows 1 message: Speed (128259) | — |
| Depth | Flows 1 message: Water Depth (128267) | — |
| Temperature & weather | Flows 3 messages: Environmental Parameters (obsolete) (130310); Environmental Parameters (130311); Temperature (130312) | — |
Maretron GPS200 + Garmin GNX 20/21 One way only
GPS / heading sensor + Instrument display · Check this pair
| Data type | Maretron GPS200 → Garmin GNX 20/21 | Garmin GNX 20/21 → Maretron GPS200 |
|---|---|---|
| Position & time | Flows 4 messages: Position, Rapid Update (129025); COG & SOG, Rapid Update (129026); GNSS Position Data (129029); +1 more | — |
| Heading & motion | Different message : both handle this data but list different PGNs | — |
| Boat speed & log | Flows 1 message: Speed (128259) | — |
Maretron GPS200 + Garmin GMI 20 One way only
GPS / heading sensor + Instrument display · Check this pair
| Data type | Maretron GPS200 → Garmin GMI 20 | Garmin GMI 20 → Maretron GPS200 |
|---|---|---|
| Position & time | Flows 4 messages: Position, Rapid Update (129025); COG & SOG, Rapid Update (129026); GNSS Position Data (129029); +1 more | — |
| Heading & motion | Different message : both handle this data but list different PGNs | — |
| Boat speed & log | Flows 1 message: Speed (128259) | — |
Gaps and fixes
Data that both devices in a pair handle, but that one can use and the other doesn't send (or sends as a different message number). Fixes only name devices whose published list sends that data.
- Heading & motion: different message numbers for Maretron GPS200 + Garmin GNX 20/21 and Maretron GPS200 + Garmin GMI 20. Could come from: Garmin GPS 24xd; Garmin Reactor 40 CCU; Actisense NGW-1 (converts from an existing NMEA 0183 device).
- Autopilot & steering: Maretron DSM250, Garmin GPSMAP x3 (7x3–16x3) and Maretron USB100 can use it, but the paired device doesn't send it. Could come from: Simrad NAC-2; Raymarine EV-1; Actisense NGW-1 (converts from an existing NMEA 0183 device).Simrad NAC-2 autopilot computerSends autopilot & steering (its maker's list says so).
Check with the manufacturer before buying. Buttons open the maker's own product page unless marked as an affiliate link.
No published data list found yet for: Garmin GHC 50 autopilot helm control, Garmin gWind wind transducer and Garmin Steadycast heading sensor. These are shown as unknown in the checker.
Also in the checker: Maretron J2K100, Maretron TLA100, Maretron SSC300, Maretron DCM100, Maretron FPM100, Maretron ACM100, Maretron WSO100, Garmin GPSMAP 8400/8600/8700, Garmin GPSMAP 10x2/12x2, Garmin GPSMAP 7400/7600, Garmin ECHOMAP UHD2 sv, Garmin ECHOMAP UHD, Garmin GPS 24xd, Garmin Reactor 40 CCU, Garmin VHF 315, Garmin AIS 800, Garmin GHC 20, Garmin GHP 12 CCU.
Installing these together
Both connect to one NMEA 2000 backbone. Full basics, with sources, are in the NMEA 2000 install guide.
What you need
- A backbone with one T-connector per device, plus one for the power cable. (Garmin support)
- Drop cables of 6 m (20 ft) or less from each T to its device. (Garmin N2K reference, B&G Zeus S manual)
- Exactly two terminators, one at each end. Don't add more if the boat's backbone already has them. (Garmin N2K reference)
- One fused 12 V power tap, switched so it doesn't drain the battery. (Garmin N2K reference, B&G Zeus S manual, Raymarine docs)
- Garmin: Garmin uses standard NMEA 2000 micro connectors. A backbone with mini connectors needs an adapter. (Garmin N2K reference)
- Garmin: The Garmin NMEA 2000 power cable has a 3 A fuse and goes on the top (middle) port of a T-connector, switched so it doesn't drain the battery. (Garmin N2K reference)
Set-up on the display
- Garmin: Check what the plotter sees: Options (or Settings) > Communications > NMEA 2000 Setup > Device List. (Garmin support)
- Garmin: Update the plotter's software (ActiveCaptain app or Garmin Express) when you add a device. (Garmin manual)
- Maretron: we haven't collected a maker set-up page yet. Follow the device's own manual.
- Update each device's software. Garmin says an update may be needed when you add a device or accessory. (Garmin manual, Raymarine docs)
How long? Estimate
No maker publishes a DIY time. Our rough estimate: 1–2 hours to add one device to an existing, healthy backbone, or 3–6 hours to build a new small backbone for 2–4 devices.
How we got it: plan the backbone and measure (Garmin says to start with a diagram), run one drop cable, fit Ts, terminators and the power tap, update software, then select sources and test. It doesn't include mounting displays or transducers, cutting holes or long cable runs through the boat. If in doubt, use a qualified (NMEA-certified) installer. (Garmin N2K reference)
Common problems
Only from makers' manuals, support articles and installation guides.
- Wrong number of terminators. There must be exactly two 120 Ω terminators, one at each end of the backbone. With the network power off, CAN-H to CAN-L should read about 60 Ω. 120 Ω means one is missing; 40 Ω means there's one too many. (Garmin support, Actisense)
- Low network voltage. Devices need at least 9 V at the far end of the backbone (Navico says errors can start below 9.5 V). On long or busy backbones, move the power tap towards the middle. (Actisense, Simrad NSS 4 manual, Garmin N2K reference)
- Duplicate data sources. Two GPS units or two depth sensors on one network can conflict. Pick the preferred source on the display. Raymarine says to have only one source per data type unless a product's documents allow more. (Raymarine 81300, Raymarine LightHouse 4, B&G NEON notes)
- Maker-only features don't cross brands. Standard data flows, but a Garmin plotter can't engage or control a third-party autopilot: it only sends Go To / Route To navigation data. Raymarine Evolution pilots list only Raymarine controllers and displays as control heads. (Garmin support, Raymarine 87472)
More checks (power feeds, devices not showing up): install guide. Check with the manufacturer or a qualified installer before buying or drilling.
What you'll need to connect this
Example: a Maretron DSM250 and a Garmin GPSMAP x3 (7x3–16x3) on a new backbone.
For 2 devices on one NMEA 2000 backbone. From the makers' install guides; see the install guide for sources. Quantities are estimates
- 1 runBackbone cableLong enough to pass every device; the length depends on your boat. Plan it on a sketch first.
- 3est.T-connectorsOne per device, plus one for the power cable.
- 2est.Drop cablesOne per device, 6 m (20 ft) or less each. Many devices come with a T-connector and drop cable in the box (Garmin lists them for the GPS 24xd, AIS 800 and GND 10), so check before you buy.
- 2TerminatorsExactly two, one at each end. Skip them if your backbone already has two.
- 1Power cable (power tap)One fused 12 V feed, in one place only, switched so it doesn't drain the battery.
One kit covers the basics
Check with the manufacturer before buying. Buttons open the maker's own product page unless marked as an affiliate link.
Open these devices in the checker to add the rest of your boat and get a kit list for all of it.
Frequently asked
Are Maretron and Garmin compatible?
Yes, mostly one way. We compared 7 Maretron–Garmin model pairs using only the data lists (PGNs) the makers publish. 1 has data flowing both ways, 6 one way only. Maretron to Garmin: mainly boat speed & log, depth, temperature & weather and position & time. Garmin to Maretron: mainly position & time, heading & motion, boat speed & log and depth. Maker-specific (proprietary) messages, used for things like cross-brand autopilot control or sonar sharing, are not counted between different brands. Check with the manufacturer before buying.
What data can a Maretron DSM250 and a Garmin GPSMAP x3 (7x3–16x3) share?
Nothing confirmed from the Maretron DSM250 to the Garmin GPSMAP x3 (7x3–16x3). From the Garmin GPSMAP x3 (7x3–16x3) to the Maretron DSM250: position & time, heading & motion, boat speed & log, depth, wind, temperature & weather, route & waypoint navigation, engine & propulsion, batteries & DC power and tank levels. Based on the makers' published PGN lists.
What doesn't work between Maretron and Garmin?
For heading & motion, some Maretron and Garmin models on this page list different message numbers (PGNs), so that data may not show up. Some pairs also have data that one device can use but neither sends, such as autopilot & steering; that needs another device or a gateway. The fixes on this page only name devices whose published list sends that data.
Sources
- Maretron DSM250 (Maretron DSM250 multi-function display): DSM250 User's Manual, Revision 1.6.2. manufacturer. Last checked 2026-11-19. Confidence: high; list complete.
- Garmin GPSMAP x3 (7x3–16x3) (Garmin GPSMAP 7x3/9x3/12x3/15x3/16x3 series): GPSMAP Owner's Manual 16x3, 15x3, 12x3, 9x3, 7x3 – NMEA 2000 PGN Information, v16, September 2026. manufacturer. Last checked 2026-11-19. Confidence: high; list complete.
- Maretron USB100 (Maretron USB100 NMEA 2000 to USB gateway (NMEA 0183 output)): USB100 User's Manual, Revision 1.8. manufacturer. Last checked 2026-11-19. Confidence: high; list complete.
- Garmin GND 10 (Garmin GND 10 (Nexus/gWind bridge)): GND 10 Installation Instructions, GUID-3A999057 v2, February 2021. manufacturer. Last checked 2026-11-19. Confidence: high; list complete.
- Maretron DST110 (Maretron DST110 depth/speed/temperature transducer): DST110 User's Manual, Revision 1.3. manufacturer. Last checked 2026-11-19. Confidence: high; list complete.
- Garmin GNX 20/21 (Garmin GNX 20 / GNX 21): GNX 20/21 Installation Instructions, GUID-E313CF8B v8, January 2025. manufacturer. Last checked 2026-11-19. Confidence: high; list complete.
- Garmin GMI 20 (Garmin GMI 20): GMI 20 Installation Instructions, GUID-D193C1DF v6, March 2025. manufacturer. Last checked 2026-11-19. Confidence: high; list complete.
- Maretron GPS200 (Maretron GPS200 GPS antenna/receiver): GPS200 User's Manual, Revision 1.4. manufacturer. Last checked 2026-11-19. Confidence: high; list complete.
Installation sources
- Garmin Support: NMEA 2000 Troubleshooting on Garmin Marine Devices. Checked 2026-11-19.
- Garmin: Technical Reference for Garmin NMEA 2000 Products. Checked 2026-11-19.
- Navico Group (B&G): B&G Zeus S Installation Manual 988-12624-001 – NMEA 2000 planning. Checked 2026-11-19.
- Raymarine: SeaTalk NG cables and accessories. Checked 2026-11-19.
- Garmin: GPSMAP x3 Owner's Manual – Software Updates. Checked 2026-11-19.
- Raymarine: Software updates (product installation instructions). Checked 2026-11-19.
- Actisense: How to build & troubleshoot an NMEA 2000 network. Checked 2026-11-19.
- Navico Group (Simrad): Simrad NSS 4 Installation Manual – NMEA 2000 planning (distributor-hosted copy). Checked 2026-11-19.
- Garmin: Technical Reference for Garmin NMEA 2000 Products – Power Distribution and Balance. Checked 2026-11-19.
- Raymarine: SeaTalk NG Reference Manual 81300 (dealer-hosted copy). Checked 2026-11-19.
- Raymarine: LightHouse 4 – Data sources settings menu. Checked 2026-11-19.
- Navico Group (B&G): NEON 2.5 software release notes (B&G Zeus S / SR). Checked 2026-11-19.
- Garmin Support: Using Third-Party Marine Autopilots with a Garmin Chartplotter. Checked 2026-11-19.
- Raymarine: Evolution EV-1 Autopilot Installation Instructions 87472 Rev 2 (12-2025), ch. 3–4. Checked 2026-11-19.
How we pick pages: chosen by hand from common brand combinations, not from search data. Model pairs are picked automatically from the devices in our dataset (main chartplotter of each brand plus devices that exchange data with it).
Other brand pairs
Garmin + Raymarine · Simrad + Garmin · Lowrance + Garmin · B&G + Garmin · Furuno + Garmin · Humminbird + Garmin · Victron + Garmin · Yacht Devices + Garmin · Actisense + Garmin · Maretron + Raymarine · All brand pairs